Butterfly Type Tilting Disc Check Valve for Water Supply & Wastewater Pump Station
Tianjin,China-November 20, 2026
The butterfly type tilting disc check valve, also widely known as the slow-closing tilting disc check valve, is a dedicated non-return valve for pump discharge pipelines in municipal water supply and wastewater pump stations. It integrates anti-backflow, low head loss and water hammer suppression functions, and stands out from conventional swing check valves and dual plate check valves with its unique two-stage closing structure fitted with counterweight and hydraulic cylinder.
In terms of structural features, this butterfly type tilting disc check valve adopts an eccentric tilting disc design. The disc rotates around an offset pivot, with a streamlined butterfly plate for smooth flow passage and low flow resistance. The main body normally uses ductile iron or WCB carbon steel with epoxy coating for corrosion resistance, and the sealing ring can be EPDM or metal hard seal for different medium requirements. Two core external components are configured: counterweight (weight hammer) and hydraulic cylinder.
Counterweight System: Connected to the disc via a lever mechanism. When the pump starts and fluid pushes the tilting disc open, the counterweight lifts together with the lever to balance the self-weight of the butterfly disc. This balance greatly reduces the differential pressure required to open the valve, cutting long-term pump energy consumption. When the pump trips and flow reverses, the counterweight provides auxiliary torque to drive the disc to close rapidly for the first 80%–90% of the stroke, blocking most reverse flow in a short time.
Hydraulic Cylinder (Oil Dashpot): Serves as the damping unit for the final slow-closing phase. After the fast closing stage finished by the counterweight, the remaining 10%–20% stroke of the tilting disc is controlled by hydraulic damping. Users can adjust the needle valve on the cylinder to set slow-closing time precisely. This staged closing avoids sharp valve slam and high water hammer pressure, which is the key advantage for large pump stations with high flow and long pipelines. The combination of counterweight and hydraulic cylinder makes the valve adaptable to complex working conditions, especially multi-pump parallel operation systems.
| Item | Details |
|---|---|
| Core structure | Eccentric butterfly tilting disc, pivot shaft, lever, counterweight, hydraulic cylinder |
| Working mode | Two-stage closing: fast closing by counterweight + slow closing by hydraulic cylinder damping |
| Materials | Ductile iron, WCB carbon steel, stainless steel; EPDM / metal seat optional |
| Installation | Horizontal installation recommended for pump outlet |
| Core benefit | Prevent backflow, suppress destructive water hammer, low pressure loss |
Application ScenariosWater Supply Pump Stations
For clean water supply pump stations, the butterfly type tilting disc check valve is the preferred selection for large-diameter raw water and tap water transmission pipelines. Its low head loss helps save power, and adjustable slow-closing performance protects centrifugal pumps and pipe networks from surge damage during sudden shutdown.
Wastewater Pump Stations
For wastewater pump stations, it is suitable for treated effluent, low-solids sewage discharge pipelines. It is not recommended for raw sewage with abundant fibers, rags and heavy sediment, as impurities may jam the pivot and lever assembly. Regular inspection and cleaning of the counterweight and hydraulic cylinder are required to keep stable operation.
As municipal water infrastructure expands, the butterfly type tilting disc check valve with counterweight and hydraulic cylinder is widely accepted by engineering contractors. It delivers reliable backflow protection and effective water hammer control, becoming a safe and economical solution for pump outlets in water supply and wastewater treatment systems.
About us
KR has more than 20 years of experience in producing standard and non-standard valves of various types. We supply a wide selection of over 500 valve products, including butterfly valve, gate valve, check valve, water control valve, as well as all their matching and accessory products.
Media Contact
Company Name: KR VAVLE (TIANJIN) CO., LTD.
Contact Person: Media Relations
Email: Send Email
Country: China
Website: https://www.tjkrvalve.com/

